1. So as to obtain the best results, we recommend removing old sealants (e.g. using REMOVER® TAL) and degreasing the surfaces to be joined using TECHNOSOL®, which should be let dry well.
2. If the materials to be joined are inactive, or if hardening should be sped up, apply NOVADURIT® AKTIVÁTOR to all the surfaces and let dry well.
3. Shake the putty thoroughly before use.
4. To prevent clogging of the application jet, do not touch the activated surface with the jet during work.
5. Apply enough putty to the spot of the future joint, assemble parts and tighten as necessary.
6. The joint resists slight pressure immediately. Let harden duly (at least 24 hours) do as to obtain maximum strength and resistance to solvents.
7. The joint can be dismantled using common tools, or it can be heated locally up to 250 °C to make dismantling easier, and dismantled while hot.
- For threaded joints
- Medium strength
- Resists high hydraulic pressures
- Maximum clearance 0.15 mm
| Chemical type |
urethane methacrylate |
| Colour |
orange |
| Corrosiveness |
none |
| Ignition point |
> 100 °C |
| Maximum joint |
up to 0.15 mm |
| Medium viscosity |
700 mPas |
| Range of temperatures |
–55 °C to +150 °C |
| Pressure resistance |
70 N/mm2 |
| Manipulation time |
5–15 min |
