1. So as to obtain the best results, we recommend removing old sealants (e.g. using REMOVER® TAL) and degreasing the surfaces to be joined using TECHNOSOL®, which should be let dry well.
2. If the materials to be joined are inactive, or if hardening should be sped up, apply NOVADURIT® AKTIVÁTOR to all the surfaces and let dry well.
3. Shake the putty thoroughly before use. To prevent clogging of the application jet, do not touch the activated surface with the jet when working.
4. Apply enough putty to the spot of the future joint, assemble parts and tighten as necessary.
- For threaded joints
- Low strength
- Max. clearance 0.1 mm
| Chemical type |
urethane methacrylate |
| Colour |
purple |
| Corrosiveness |
none |
| Ignition point |
> 100 °C |
| Maximum joint |
up to 0.1 mm |
| Viscosity |
medium, 3 000 mPas |
| Range of temperatures |
–55 °C to +150 °C |
| Break-off torque |
6–10 N.m |
| Manipulation time |
3–15 min. |
