1. Remove old cement and dirt from the place of application and degrease it with the TECHNOSOL® product if necessary.
2. Check before application whether the delivery nozzle is clear and clean it if necessary.
3. Apply the cement with a gun at temperatures from 5 °C up to 35 °C.
4. Use a tubule or your finger wetted in a detergent solution to form the radius.
5. After the work is complete, close the delivery nozzle or, if appropriate, let about 1 cm of the cement protrude,
- Excellent sealing and gluing properties
- High adhesive capacity
- It does not shrink
- It can be abraded and painted after setting
- Good resistance to climatic conditions, salty water and UV radiation
| Time for formation of non-sticky jacket |
15 to 25 min. |
| Total hardening |
3 mm/24 hours |
| Thermal stability |
from -40 °C up 90 °C (160 °C for 2-3 hours) |
| Density (at 20 °C) |
1 440 kg/m3 |
| Tensile strength (DIN 53504) |
25 N/mm2 |
| Contractibility |
about 1,0 % |
| Elongation at break |
about 500 % |
