The adhesive surfaces must be clean, dry and solid. TECHNOSOL® can be used for cleaning and degreasing.
We recommend priming coat for porous surfaces (like concrete).
Expansion joints dimensions: min. 5 mm – max. 25 mm. Excellent results of painting are obtained after about three days after application with varnished soluble in water. Alkyd resin varnishes are not suitable, as they can shrink when hardening.
Every user is obligated to verify, by his own tests, whether the material is suitable for the intended use.
- Excellent sealing properties on glass, glazed surfaces, enamel, china, epoxide, polyester, hard PVC, high-grade steel, and wood
- Excellent gluing properties in gluing panels, wooden bars, window ledged, strips, mirrors, and installation materials
- High adhesion
- Does not contain isocyanates, solvents, silicon; odourless
- Long life
Base |
flexible |
Treatment temperature |
+5 to +40 °C |
Time for formation of non-stick layer |
15 to 20 min |
Total hardening |
1 až 1.5 mm/24 h |
Thermal stability |
–40 až +100 °C |
Contractility |
does not contract |
Practical expansivity |
± 25 % |
Ductility to rupture |
250 % |
Density |
1.4 g/ml |
Tensile strength (DI N 53504)) |
2.20 MPa |
Hardness – Shore A (DI N 53505) |
38 / 40 ° |
Warranty period |
6 months |
Chemical resistance |
Good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids Adequate: esters, ketons, aromatic hydrocarbons Bad: concentrated acids, chlorinated solvents, chlorine from swimming pools |